CNC-Slotted Rosewood Guitar Fingerboard – 25.5 in

The CNC-slotted rosewood fretboard is intended for lutherie projects requiring accurate preparation.
It provides a reliable starting point for custom builds.
This fretboard is made from carefully selected rosewood.
The wood is properly dried before machining.
It offers stability suited to workshop operations.

This rosewood guitar fretboard is supplied with CNC-machined fret slots.
The slots are 0.6 mm wide.
Slot depth is 2 mm.
The slotted fretboard has 22 fret positions.
CNC machining ensures consistent spacing.
It makes subsequent fretting operations easier.

Two scale lengths are available as product variations.
The 25.5-inch scale length is available.
The 24.75-inch scale length is also offered.
These two standards cover most electric guitar projects.
Choosing the scale length allows the fretboard to be matched directly to your build.

The slotted fretboard has not been cut to its final outline.
The slots therefore extend across the full width, except when a radius is applied, as the convex surface requires greater slot depth.
This is normal for a CNC-prepared blank.
It helps remove chips during fretting.
It also improves visibility when aligning frets.
After shaping, the slots regain a clean appearance.

This CNC-slotted rosewood fretboard can be supplied without a radius.
It can also be radiused on request.
Eight radii are offered in the product variations.
The available radii are 7.25 – 9.5 – 10 – 12 – 14 – 16 – 17 – 20 inches.
CNC radiusing provides a consistent curve.
It offers a sound foundation before final finishing.

Choosing a radiused or flat surface remains a workshop decision.
The luthier retains control over subsequent steps.
This rosewood guitar fretboard suits traditional methods.
It also works with modern CNC-assisted processes.

The rosewood used has an even grain.
This makes sanding and levelling easier.
It behaves consistently during preliminary finishing.
Its balanced density makes it comfortable to work with.

This rosewood guitar fretboard follows classic standards.
It fits readily into existing templates.
It suits long-scale and short-scale projects.
It is intended for professional luthiers and experienced hobbyists.

This CNC-slotted rosewood fretboard is designed as a technical starting point.
It offers accuracy, consistency and flexibility.
It allows the construction of customised instruments.
It reflects a rigorous and adaptable workshop approach.

To explore other lutherie components, browse the dedicated category:
https://lvsublim.com/outils-accessoires-lutherie-guitare
For recognised technical references, visit:
https://lutherie-guitare.org/wordpress/